TubularComponent (WITSML Objects Helper Library 1.0-SNAPSHOT API)

java.lang.Object
- java.lang.Enum<TubularComponent>
- - com.hashmapinc.tempus.WitsmlObjects.v1311.TubularComponent

All Implemented Interfaces:: Serializable, Comparable<TubularComponent>

public enum TubularComponent
extends Enum<TubularComponent>

Java class for TubularComponent.

The following schema fragment specifies the expected content contained within this class.

 
 <simpleType name="TubularComponent">
   <restriction base="{http://www.witsml.org/schemas/131}abstractTypeEnum">
     <enumeration value="non-magnetic stabilizer"/>
     <enumeration value="non-magnetic collar"/>
     <enumeration value="stabilizer"/>
     <enumeration value="adjustable kickoff"/>
     <enumeration value="accelerator"/>
     <enumeration value="rotary steering tool"/>
     <enumeration value="sub-bar catcher"/>
     <enumeration value="sub-bent"/>
     <enumeration value="bit core diamond"/>
     <enumeration value="bit core PDC"/>
     <enumeration value="bit diamond fixed cut"/>
     <enumeration value="bit insert roller cone"/>
     <enumeration value="bit mill tooth roller cone"/>
     <enumeration value="bit PDC fixed cutter"/>
     <enumeration value="sub-bit"/>
     <enumeration value="bridge plug"/>
     <enumeration value="bullnose"/>
     <enumeration value="bull plug"/>
     <enumeration value="sub-bumper"/>
     <enumeration value="casing"/>
     <enumeration value="casing cutter"/>
     <enumeration value="hanger casing subsea"/>
     <enumeration value="hanger casing surface"/>
     <enumeration value="casing head"/>
     <enumeration value="catch assembly"/>
     <enumeration value="sub-catcher"/>
     <enumeration value="sub-circulation"/>
     <enumeration value="coiled tubing in hole"/>
     <enumeration value="coiled tubing on coil"/>
     <enumeration value="drill pipe compressive"/>
     <enumeration value="sub-cone"/>
     <enumeration value="core barrel"/>
     <enumeration value="core orientation barrel"/>
     <enumeration value="sub-crossover"/>
     <enumeration value="casing crossover"/>
     <enumeration value="sub-dart"/>
     <enumeration value="die collar"/>
     <enumeration value="die collar LH"/>
     <enumeration value="directional guidance system"/>
     <enumeration value="drill collar"/>
     <enumeration value="drill pipe"/>
     <enumeration value="drill pipe LH"/>
     <enumeration value="drill stem test BHA"/>
     <enumeration value="drive pipe"/>
     <enumeration value="dual catch assembly"/>
     <enumeration value="extension bowl overshot"/>
     <enumeration value="extension sub-overshot"/>
     <enumeration value="float collar"/>
     <enumeration value="float shoe"/>
     <enumeration value="sub-float"/>
     <enumeration value="flow head"/>
     <enumeration value="guide shoe"/>
     <enumeration value="MWD hang off sub"/>
     <enumeration value="heavy weight drill pipe"/>
     <enumeration value="heavy weight drill pipe LH"/>
     <enumeration value="riser high pressure"/>
     <enumeration value="bit hole opener"/>
     <enumeration value="casing inflatable packer"/>
     <enumeration value="motor instrumented"/>
     <enumeration value="jar"/>
     <enumeration value="sub-jetting"/>
     <enumeration value="junk basket"/>
     <enumeration value="junk basket reverse circulation"/>
     <enumeration value="sub-junk"/>
     <enumeration value="kelly"/>
     <enumeration value="keyseat wiper tool"/>
     <enumeration value="landing float collar"/>
     <enumeration value="lead impression block"/>
     <enumeration value="liner"/>
     <enumeration value="hanger liner"/>
     <enumeration value="magnet"/>
     <enumeration value="riser marine"/>
     <enumeration value="mill dress"/>
     <enumeration value="mill flat bottom"/>
     <enumeration value="mill hollow"/>
     <enumeration value="mill polish"/>
     <enumeration value="mill section"/>
     <enumeration value="mill taper"/>
     <enumeration value="mill washover"/>
     <enumeration value="mill packer picker assembly"/>
     <enumeration value="millout extension"/>
     <enumeration value="multilateral hanger running tool"/>
     <enumeration value="hanger mud line"/>
     <enumeration value="motor"/>
     <enumeration value="mule shoe"/>
     <enumeration value="logging while drilling tool"/>
     <enumeration value="stabilizer near bit roller reamer"/>
     <enumeration value="stabilizer near bit"/>
     <enumeration value="stabilizer non-rotating"/>
     <enumeration value="sub-orienting"/>
     <enumeration value="other"/>
     <enumeration value="overshot"/>
     <enumeration value="overshot LH"/>
     <enumeration value="oversize lip guide overshot"/>
     <enumeration value="packer"/>
     <enumeration value="polished bore receptacle"/>
     <enumeration value="mill pilot"/>
     <enumeration value="pipe cutter"/>
     <enumeration value="ported stinger"/>
     <enumeration value="sub-ported"/>
     <enumeration value="prepacked screens"/>
     <enumeration value="sub-pressure relief"/>
     <enumeration value="riser production"/>
     <enumeration value="MWD pulser"/>
     <enumeration value="sub-pump out"/>
     <enumeration value="sub-restrictor"/>
     <enumeration value="packer retrieve TT squeeze"/>
     <enumeration value="reversing tool"/>
     <enumeration value="stabilizer string roller reamer"/>
     <enumeration value="packer RTTS"/>
     <enumeration value="running tool"/>
     <enumeration value="safety joint"/>
     <enumeration value="safety joint LH"/>
     <enumeration value="sub-saver"/>
     <enumeration value="scab liner bit guide"/>
     <enumeration value="scraper"/>
     <enumeration value="scratchers"/>
     <enumeration value="casing shoe screw-in"/>
     <enumeration value="sub-shock"/>
     <enumeration value="drill collar short"/>
     <enumeration value="sub-side entry"/>
     <enumeration value="slotted liner"/>
     <enumeration value="spear"/>
     <enumeration value="stage cement collar"/>
     <enumeration value="motor steerable"/>
     <enumeration value="packer storm valve RTTS"/>
     <enumeration value="stabilizer string"/>
     <enumeration value="surface pipe"/>
     <enumeration value="taper tap"/>
     <enumeration value="taper tap LH"/>
     <enumeration value="tubing-conveyed perforating gun"/>
     <enumeration value="thruster"/>
     <enumeration value="tieback polished bore receptacle"/>
     <enumeration value="tieback stinger"/>
     <enumeration value="tubing"/>
     <enumeration value="hanger tubing"/>
     <enumeration value="turbine"/>
     <enumeration value="bit under reamer"/>
     <enumeration value="stabilizer variable blade"/>
     <enumeration value="washover pipe"/>
     <enumeration value="mill watermelon"/>
     <enumeration value="whipstock"/>
     <enumeration value="whipstock anchor"/>
     <enumeration value="stabilizer turbo back"/>
     <enumeration value="stabilizer inline"/>
     <enumeration value="stabilizer steerable"/>
     <enumeration value="sub-stop"/>
     <enumeration value="sub-filter"/>
     <enumeration value="mill casing cutting"/>
     <enumeration value="reamer"/>
     <enumeration value="unknown"/>
   </restriction>
 </simpleType>

Enum Constant Summary

Enum Constants
Enum Constant and Description
`ACCELERATOR` A downhole tool used in conjunction with a jar that stores energy for rapid release when the jar is fired.
`ADJUSTABLE_KICKOFF` A sub that is used with a downhole motor to change the direction of the wellbore.
`BIT_CORE_DIAMOND` A diamond tipped drill bit used for coring
`BIT_CORE_PDC` Polycrystalline diamond compact core bit.
`BIT_DIAMOND_FIXED_CUT` Drill bit with cutters containing diamonds.
`BIT_HOLE_OPENER` Drill bit used for enlarging the hole.
`BIT_INSERT_ROLLER_CONE` Roller cone bit with cutters made from tungsten carbide or other wear resistant material.
`BIT_MILL_TOOTH_ROLLER_CONE` Roller cone drill bit with steel teeth.
`BIT_PDC_FIXED_CUTTER` Polycrystalline diamond compact drill bit.
`BIT_UNDER_REAMER` Component that is run behind the bit and opens out the hole to a larger diameter.
`BRIDGE_PLUG` A downhole tool that is located and set to isolate the lower part of the wellbore.
`BULL_PLUG` A solid plug used as an isolation device in piping systems, conduits or wellbore tubulars.
`BULLNOSE` A blank end component substituting for a bit, when re entering an already existing hole to guide the BHA, to avoid inadvertent sidetracks, such as when run below a hole opener in an existing hole.
`CASING` Tubing used to line the wellbore and protect against pressure differences between the wellbore fluids and the formation.
`CASING_CROSSOVER` Component used to convert between casing threads and/or sizes.
`CASING_CUTTER` Tool used for cutting through casing.
`CASING_HEAD` The adapter between the first casing string and either the BOP stack (during drilling) or the wellhead (after completion).
`CASING_INFLATABLE_PACKER` Expandable device used for packing off or isolating a section of wellbore used for performing well pressure tests.
`CASING_SHOE_SCREW_IN` Screw-in casing shoe.
`CATCH_ASSEMBLY`
`COILED_TUBING_IN_HOLE` Section of coiled tubing that is inside the wellbore.
`COILED_TUBING_ON_COIL` Section of coiled tubing that is on the coil.
`CORE_BARREL` Tool used with a coring bit to retrieve geological core samples.
`CORE_ORIENTATION_BARREL` Core barrel used to sample geological cores at a know orientation.
`DIE_COLLAR`
`DIE_COLLAR_LH` Die collar with left-handed thread.
`DIRECTIONAL_GUIDANCE_SYSTEM` A tool that permits control of the drilling direction.
`DRILL_COLLAR` Heavy pipe without tool joints used to apply weight to the bit.
`DRILL_COLLAR_SHORT` Short drill collar used to adjust the length and spacing of BHA components.
`DRILL_PIPE` Pipe used to convey the drilling assembly to the bottom of the hole.
`DRILL_PIPE_COMPRESSIVE` Strengthened drill pipe.
`DRILL_PIPE_LH` Left-handed thread drill pipe
`DRILL_STEM_TEST_BHA` Bottom Hole Assembly for drill stem testing
`DRIVE_PIPE` Pipe that is driven into the ground or sea bed to start drilling a well.
`DUAL_CATCH_ASSEMBLY`
`EXTENSION_BOWL_OVERSHOT` A type of overshot tool used in fishing stuck pipe.
`EXTENSION_SUB_OVERSHOT` A type of overshot tool used in fishing stuck pipe.
`FLOAT_COLLAR` A short length of casing fitted with a check valve.
`FLOAT_SHOE` A tapered, often bullet-nosed device fitted with a check valve and typically found at the bottom of a casing string.
`FLOW_HEAD`
`GUIDE_SHOE` A tapered, often bullet-nosed piece of equipment often found on the bottom of a casing string.
`HANGER_CASING_SUBSEA` Component used to hang a casing string from the well head at the sea bed.
`HANGER_CASING_SURFACE` Component used to hang casing from a surface location on land or a fixed platform.
`HANGER_LINER` Component that is used to hang liner from inside casing.
`HANGER_MUD_LINE`
`HANGER_TUBING` Component used to hang tubing inside casing or liner.
`HEAVY_WEIGHT_DRILL_PIPE` A type of drillpipe whose walls are thicker and collars are longer than conventional drillpipe.
`HEAVY_WEIGHT_DRILL_PIPE_LH` Left-handed thread heavy weight drill pipe.
`JAR` Hydraulic or spring-loaded component used to free stuck pipe.
`JUNK_BASKET` Component used to collect debris from the bottom of the hole.
`JUNK_BASKET_REVERSE_CIRCULATION` Component used to collect debris from the bottom of the hole when reverse circulating
`KELLY` Hexagonal or square pipe used to rotate the drill string from the rig floor.
`KEYSEAT_WIPER_TOOL` Tool used to open out narrow sections of open hole caused by pipe friction in tight radius bends.
`LANDING_FLOAT_COLLAR` A component installed near the bottom of the casing string on which the cement plugs land during the primary cementing operation.
`LEAD_IMPRESSION_BLOCK` Tool run on pipe or wireline to engage the top of a fish, and enable the condition of the exposed end of the fish to be ascertained from the pattern in soft lead in the tool.
`LINER` Casing or tubing that is hung from the inside of existing casing rather than from the sea bed or surface.
`LOGGING_WHILE_DRILLING_TOOL` Tool that can take downhole measurements of formation properties and wellbore direction while drilling.
`MAGNET` Magnet used to retrieve magnetic debris from the hole.
`MILL_CASING_CUTTING` Milling tool used for cutting through casing.
`MILL_DRESS` Milling tool used to dress or clean up pipe that is to be retrieved from the hole.
`MILL_FLAT_BOTTOM` Flat bottomed milling tool, used to tidy up the broken end of pipe stuck in the hole prior to fishing.
`MILL_HOLLOW` Hollow milling tool
`MILL_PACKER_PICKER_ASSEMBLY`
`MILL_PILOT` Milling tool used in fishing stuck pipe.
`MILL_POLISH`
`MILL_SECTION`
`MILL_TAPER` Tapered milling tool.
`MILL_WASHOVER` Large diameter milling tool that goes over the end of stuck pipe.
`MILL_WATERMELON` Milling tool shaped like a watermelon.
`MILLOUT_EXTENSION`
`MOTOR` Downhole tool, usually powered by fluid flow, that rotates the drill bit.
`MOTOR_INSTRUMENTED` Downhole mud motor that can also take measurements of downhole drilling parameters.
`MOTOR_STEERABLE` Downhole motor, usually powered by mud flow, that can be steered.
`MULE_SHOE`
`MULTILATERAL_HANGER_RUNNING_TOOL` Tool used to hang casing in multi-lateral wellbores.
`MWD_HANG_OFF_SUB` Component used for hanging the Measurement While Drilling tool.
`MWD_PULSER` Measurement While Drilling component that send encodes downhole data into hydraulic pulses that can be detected and decoded at the surface.
`NON_MAGNETIC_COLLAR` Drill colllar made from non-magnetic material.
`NON_MAGNETIC_STABILIZER`
`OTHER`
`OVERSHOT` Tool used for retrieving pipe that has been lost in the hole.
`OVERSHOT_LH` Left-handed overshot tool.
`OVERSIZE_LIP_GUIDE_OVERSHOT` Specific type of overshot tool used for fishing.
`PACKER` Component that can be inflated so that it seals off a section of the wellbore, typically for formation testing.
`PACKER_RETRIEVE_TT_SQUEEZE` Torque Transmission
`PACKER_RTTS` Retrievable packer, designed for testing, treating, and squeezing.
`PACKER_STORM_VALVE_RTTS` Retrievable packer, designed for testing, treating, and squeezing.
`PIPE_CUTTER` Tool for cutting through pipe that has become stuck in the hole.
`POLISHED_BORE_RECEPTACLE`
`PORTED_STINGER`
`PREPACKED_SCREENS` A type of screen used in sand control applications to support the gravel pack.
`REAMER` Tool used to enlarge the hole.
`REVERSING_TOOL` A downhole tool that is designed to enable communication between the tubing internal diameter and the annulus, typically for reverse-circulation purposes
`RISER_HIGH_PRESSURE` Marine riser used for deep water or high pressure applications
`RISER_MARINE` Large diameter pipe that connects from the sea bed to an offshore rig.
`RISER_PRODUCTION` Riser pipe used to carry produced fluids.
`ROTARY_STEERING_TOOL` A downhole tool that can steer the progress of the bit by applying forces to the sides of the hole while drilling with rotating pipe.
`RUNNING_TOOL`
`SAFETY_JOINT` A weak spot in the drillstring so that if tension in the drillstring exceeds a predetermined amount, the safety joint will part and the rest of the drillstring will be salvageable.
`SAFETY_JOINT_LH` Left-handed threaded safety joint providing a weak spot in the drillstring so that if tension in the drillstring exceeds a predetermined amount, the safety joint will part and the rest of the drillstring will be salvageable.
`SCAB_LINER_BIT_GUIDE`
`SCRAPER`
`SCRATCHERS` A device for cleaning mud and mud filter cake off of the wellbore wall when cementing casing in the hole to ensure good contact and bonding between the cement and the wellbore wall.
`SLOTTED_LINER` Liner casing that has slots to allow passage of produced fluids.
`SPEAR` Fishing tool that attaches to the inside of the stuck pipe by threads or grapples.
`STABILIZER` Drill string component with blades that help keep the drill string away from the sides of the hole.
`STABILIZER_INLINE`
`STABILIZER_NEAR_BIT` Stabilizer placed near the bit to provide directional control.
`STABILIZER_NEAR_BIT_ROLLER_REAMER` Stabilizer that is placed close to the bit
`STABILIZER_NON_ROTATING` Stabilizer that does not rotate with the drill string.
`STABILIZER_STEERABLE` Stabilizer with adjustable blades to allow steering the drilling direction.
`STABILIZER_STRING`
`STABILIZER_STRING_ROLLER_REAMER` A stabilizer that has rotating rollers rather than fixed blades to reduce friction with the sides of the hole.
`STABILIZER_TURBO_BACK`
`STABILIZER_VARIABLE_BLADE` Stabilizer with blades that can be adjusted to varying diameters.
`STAGE_CEMENT_COLLAR`
`SUB_BAR_CATCHER`
`SUB_BENT` A drill string component that has a fixed bend angle.
`SUB_BIT` Drill string component used to connect the drill bit to the rest of the string.
`SUB_BUMPER` A spring loaded component used to minimize variations in weight transfer to the drill bit.
`SUB_CATCHER`
`SUB_CIRCULATION` Component used to allow venting part of the drilling fluids into the annulus rather than through the bit.
`SUB_CONE`
`SUB_CROSSOVER` Sub used to convert from one thread type or size to another.
`SUB_DART` A sub that controls activation of tools by means of dropping a dart down the drillstring.
`SUB_FILTER`
`SUB_FLOAT` A valve, plunger or flapper, run in a drill collar to prevent fluid flow and debris into the string while running in hole.
`SUB_JETTING`
`SUB_JUNK` Component used to collect debris from the bottom of the hole.
`SUB_ORIENTING` Sub used to orient the drill string for directionla drilling.
`SUB_PORTED` Component with a port or vent tha allows mud to be circulated into the annulus.
`SUB_PRESSURE_RELIEF` Component used to relieve wellbore pressures.
`SUB_PUMP_OUT`
`SUB_RESTRICTOR` Component that provides a restriction to mud flow to control hydraulics.
`SUB_SAVER` Component used to reduce wear on the threads of components such as drill bits that are often re-used.
`SUB_SHOCK`
`SUB_SIDE_ENTRY`
`SUB_STOP`
`SURFACE_PIPE` Pipework that connects the top of the drillstring to the mud pumps.
`TAPER_TAP` Tool used to tap a thread into components that are stuck in the hole.
`TAPER_TAP_LH` Left-handed thread tapping tool.
`THRUSTER` Drilling tool used to maintain weight on bit.
`TIEBACK_POLISHED_BORE_RECEPTACLE`
`TIEBACK_STINGER` Tool used to position a tie-back string of tubing connecting a liner to the surface.
`TUBING` Small diameter pipe that is run inside casing or tubing as part of the well completion.
`TUBING_CONVEYED_PERFORATING_GUN` Perforating gun that is deployed on the end of a tubular string rather than a wireline
`TURBINE` Downhole device used for directional drilling, powered by mud circulation that rotates the drill bit while the drill string remains non-rotating
`UNKNOWN` The value is not known.
`WASHOVER_PIPE` Large diameter pipe with an internal grapple used for retrieving stuch pipe.
`WHIPSTOCK` Wedge shaped tool used to drill off in a different direction.
`WHIPSTOCK_ANCHOR` Anchor device used to position whipstock.

Method Summary

All Methods Static Methods Instance Methods Concrete Methods
Modifier and Type	Method and Description
`static TubularComponent`	`fromValue(String v)`
`String`	`value()`
`static TubularComponent`	`valueOf(String name)` Returns the enum constant of this type with the specified name.
`static TubularComponent[]`	`values()` Returns an array containing the constants of this enum type, in the order they are declared.

Methods inherited from class java.lang.Enum
compareTo, equals, getDeclaringClass, hashCode, name, ordinal, toString, valueOf

Methods inherited from class java.lang.Object
getClass, notify, notifyAll, wait, wait, wait

- Enum Constant Detail
  - NON_MAGNETIC_STABILIZER
```
public static final TubularComponent NON_MAGNETIC_STABILIZER
```
  - NON_MAGNETIC_COLLAR
```
public static final TubularComponent NON_MAGNETIC_COLLAR
```
    Drill colllar made from non-magnetic material. Used to avoid magnetic interference with downhole directional measurements.
  - STABILIZER
```
public static final TubularComponent STABILIZER
```
    Drill string component with blades that help keep the drill string away from the sides of the hole.
  - ADJUSTABLE_KICKOFF
```
public static final TubularComponent ADJUSTABLE_KICKOFF
```
    A sub that is used with a downhole motor to change the direction of the wellbore. It can be adjusted to give a variable angle of deviation.
  - ACCELERATOR
```
public static final TubularComponent ACCELERATOR
```
    A downhole tool used in conjunction with a jar that stores energy for rapid release when the jar is fired. Depending on the operating mode, the energy in tension or compression is stored by means of a mechanical spring or compressible fluid such as nitrogen gas.
  - ROTARY_STEERING_TOOL
```
public static final TubularComponent ROTARY_STEERING_TOOL
```
    A downhole tool that can steer the progress of the bit by applying forces to the sides of the hole while drilling with rotating pipe.
  - SUB_BAR_CATCHER
```
public static final TubularComponent SUB_BAR_CATCHER
```
  - SUB_BENT
```
public static final TubularComponent SUB_BENT
```
    A drill string component that has a fixed bend angle. Used in conjunction with a downhole motor for deviating the wellbore.
  - BIT_CORE_DIAMOND
```
public static final TubularComponent BIT_CORE_DIAMOND
```
    A diamond tipped drill bit used for coring
  - BIT_CORE_PDC
```
public static final TubularComponent BIT_CORE_PDC
```
    Polycrystalline diamond compact core bit.
  - BIT_DIAMOND_FIXED_CUT
```
public static final TubularComponent BIT_DIAMOND_FIXED_CUT
```
    Drill bit with cutters containing diamonds.
  - BIT_INSERT_ROLLER_CONE
```
public static final TubularComponent BIT_INSERT_ROLLER_CONE
```
    Roller cone bit with cutters made from tungsten carbide or other wear resistant material.
  - BIT_MILL_TOOTH_ROLLER_CONE
```
public static final TubularComponent BIT_MILL_TOOTH_ROLLER_CONE
```
    Roller cone drill bit with steel teeth.
  - BIT_PDC_FIXED_CUTTER
```
public static final TubularComponent BIT_PDC_FIXED_CUTTER
```
    Polycrystalline diamond compact drill bit.
  - SUB_BIT
```
public static final TubularComponent SUB_BIT
```
    Drill string component used to connect the drill bit to the rest of the string.
  - BRIDGE_PLUG
```
public static final TubularComponent BRIDGE_PLUG
```
    A downhole tool that is located and set to isolate the lower part of the wellbore.
  - BULLNOSE
```
public static final TubularComponent BULLNOSE
```
    A blank end component substituting for a bit, when re entering an already existing hole to guide the BHA, to avoid inadvertent sidetracks, such as when run below a hole opener in an existing hole.
  - BULL_PLUG
```
public static final TubularComponent BULL_PLUG
```
    A solid plug used as an isolation device in piping systems, conduits or wellbore tubulars.
  - SUB_BUMPER
```
public static final TubularComponent SUB_BUMPER
```
    A spring loaded component used to minimize variations in weight transfer to the drill bit.
  - CASING
```
public static final TubularComponent CASING
```
    Tubing used to line the wellbore and protect against pressure differences between the wellbore fluids and the formation.
  - CASING_CUTTER
```
public static final TubularComponent CASING_CUTTER
```
    Tool used for cutting through casing.
  - HANGER_CASING_SUBSEA
```
public static final TubularComponent HANGER_CASING_SUBSEA
```
    Component used to hang a casing string from the well head at the sea bed.
  - HANGER_CASING_SURFACE
```
public static final TubularComponent HANGER_CASING_SURFACE
```
    Component used to hang casing from a surface location on land or a fixed platform.
  - CASING_HEAD
```
public static final TubularComponent CASING_HEAD
```
    The adapter between the first casing string and either the BOP stack (during drilling) or the wellhead (after completion).
  - CATCH_ASSEMBLY
```
public static final TubularComponent CATCH_ASSEMBLY
```
  - SUB_CATCHER
```
public static final TubularComponent SUB_CATCHER
```
  - SUB_CIRCULATION
```
public static final TubularComponent SUB_CIRCULATION
```
    Component used to allow venting part of the drilling fluids into the annulus rather than through the bit.
  - COILED_TUBING_IN_HOLE
```
public static final TubularComponent COILED_TUBING_IN_HOLE
```
    Section of coiled tubing that is inside the wellbore.
  - COILED_TUBING_ON_COIL
```
public static final TubularComponent COILED_TUBING_ON_COIL
```
    Section of coiled tubing that is on the coil.
  - DRILL_PIPE_COMPRESSIVE
```
public static final TubularComponent DRILL_PIPE_COMPRESSIVE
```
    Strengthened drill pipe.
  - SUB_CONE
```
public static final TubularComponent SUB_CONE
```
  - CORE_BARREL
```
public static final TubularComponent CORE_BARREL
```
    Tool used with a coring bit to retrieve geological core samples.
  - CORE_ORIENTATION_BARREL
```
public static final TubularComponent CORE_ORIENTATION_BARREL
```
    Core barrel used to sample geological cores at a know orientation.
  - SUB_CROSSOVER
```
public static final TubularComponent SUB_CROSSOVER
```
    Sub used to convert from one thread type or size to another.
  - CASING_CROSSOVER
```
public static final TubularComponent CASING_CROSSOVER
```
    Component used to convert between casing threads and/or sizes.
  - SUB_DART
```
public static final TubularComponent SUB_DART
```
    A sub that controls activation of tools by means of dropping a dart down the drillstring.
  - DIE_COLLAR
```
public static final TubularComponent DIE_COLLAR
```
  - DIE_COLLAR_LH
```
public static final TubularComponent DIE_COLLAR_LH
```
    Die collar with left-handed thread.
  - DIRECTIONAL_GUIDANCE_SYSTEM
```
public static final TubularComponent DIRECTIONAL_GUIDANCE_SYSTEM
```
    A tool that permits control of the drilling direction.
  - DRILL_COLLAR
```
public static final TubularComponent DRILL_COLLAR
```
    Heavy pipe without tool joints used to apply weight to the bit.
  - DRILL_PIPE
```
public static final TubularComponent DRILL_PIPE
```
    Pipe used to convey the drilling assembly to the bottom of the hole.
  - DRILL_PIPE_LH
```
public static final TubularComponent DRILL_PIPE_LH
```
    Left-handed thread drill pipe
  - DRILL_STEM_TEST_BHA
```
public static final TubularComponent DRILL_STEM_TEST_BHA
```
    Bottom Hole Assembly for drill stem testing
  - DRIVE_PIPE
```
public static final TubularComponent DRIVE_PIPE
```
    Pipe that is driven into the ground or sea bed to start drilling a well.
  - DUAL_CATCH_ASSEMBLY
```
public static final TubularComponent DUAL_CATCH_ASSEMBLY
```
  - EXTENSION_BOWL_OVERSHOT
```
public static final TubularComponent EXTENSION_BOWL_OVERSHOT
```
    A type of overshot tool used in fishing stuck pipe.
  - EXTENSION_SUB_OVERSHOT
```
public static final TubularComponent EXTENSION_SUB_OVERSHOT
```
    A type of overshot tool used in fishing stuck pipe.
  - FLOAT_COLLAR
```
public static final TubularComponent FLOAT_COLLAR
```
    A short length of casing fitted with a check valve. Prevents fluids from flowing back up the tubular string.
  - FLOAT_SHOE
```
public static final TubularComponent FLOAT_SHOE
```
    A tapered, often bullet-nosed device fitted with a check valve and typically found at the bottom of a casing string.
  - SUB_FLOAT
```
public static final TubularComponent SUB_FLOAT
```
    A valve, plunger or flapper, run in a drill collar to prevent fluid flow and debris into the string while running in hole. Sometime ported with a small leak path to allow shut in drillpipe pressure readings.
  - FLOW_HEAD
```
public static final TubularComponent FLOW_HEAD
```
  - GUIDE_SHOE
```
public static final TubularComponent GUIDE_SHOE
```
    A tapered, often bullet-nosed piece of equipment often found on the bottom of a casing string. Helps to guide the casing down the center of the hole when a casing string is being run into the hole.
  - MWD_HANG_OFF_SUB
```
public static final TubularComponent MWD_HANG_OFF_SUB
```
    Component used for hanging the Measurement While Drilling tool.
  - HEAVY_WEIGHT_DRILL_PIPE
```
public static final TubularComponent HEAVY_WEIGHT_DRILL_PIPE
```
    A type of drillpipe whose walls are thicker and collars are longer than conventional drillpipe.
  - HEAVY_WEIGHT_DRILL_PIPE_LH
```
public static final TubularComponent HEAVY_WEIGHT_DRILL_PIPE_LH
```
    Left-handed thread heavy weight drill pipe.
  - RISER_HIGH_PRESSURE
```
public static final TubularComponent RISER_HIGH_PRESSURE
```
    Marine riser used for deep water or high pressure applications
  - BIT_HOLE_OPENER
```
public static final TubularComponent BIT_HOLE_OPENER
```
    Drill bit used for enlarging the hole.
  - CASING_INFLATABLE_PACKER
```
public static final TubularComponent CASING_INFLATABLE_PACKER
```
    Expandable device used for packing off or isolating a section of wellbore used for performing well pressure tests.
  - MOTOR_INSTRUMENTED
```
public static final TubularComponent MOTOR_INSTRUMENTED
```
    Downhole mud motor that can also take measurements of downhole drilling parameters.
  - JAR
```
public static final TubularComponent JAR
```
    Hydraulic or spring-loaded component used to free stuck pipe.
  - SUB_JETTING
```
public static final TubularComponent SUB_JETTING
```
  - JUNK_BASKET
```
public static final TubularComponent JUNK_BASKET
```
    Component used to collect debris from the bottom of the hole.
  - JUNK_BASKET_REVERSE_CIRCULATION
```
public static final TubularComponent JUNK_BASKET_REVERSE_CIRCULATION
```
    Component used to collect debris from the bottom of the hole when reverse circulating
  - SUB_JUNK
```
public static final TubularComponent SUB_JUNK
```
    Component used to collect debris from the bottom of the hole.
  - KELLY
```
public static final TubularComponent KELLY
```
    Hexagonal or square pipe used to rotate the drill string from the rig floor.
  - KEYSEAT_WIPER_TOOL
```
public static final TubularComponent KEYSEAT_WIPER_TOOL
```
    Tool used to open out narrow sections of open hole caused by pipe friction in tight radius bends.
  - LANDING_FLOAT_COLLAR
```
public static final TubularComponent LANDING_FLOAT_COLLAR
```
    A component installed near the bottom of the casing string on which the cement plugs land during the primary cementing operation.
  - LEAD_IMPRESSION_BLOCK
```
public static final TubularComponent LEAD_IMPRESSION_BLOCK
```
    Tool run on pipe or wireline to engage the top of a fish, and enable the condition of the exposed end of the fish to be ascertained from the pattern in soft lead in the tool.
  - LINER
```
public static final TubularComponent LINER
```
    Casing or tubing that is hung from the inside of existing casing rather than from the sea bed or surface.
  - HANGER_LINER
```
public static final TubularComponent HANGER_LINER
```
    Component that is used to hang liner from inside casing.
  - MAGNET
```
public static final TubularComponent MAGNET
```
    Magnet used to retrieve magnetic debris from the hole.
  - RISER_MARINE
```
public static final TubularComponent RISER_MARINE
```
    Large diameter pipe that connects from the sea bed to an offshore rig.
  - MILL_DRESS
```
public static final TubularComponent MILL_DRESS
```
    Milling tool used to dress or clean up pipe that is to be retrieved from the hole.
  - MILL_FLAT_BOTTOM
```
public static final TubularComponent MILL_FLAT_BOTTOM
```
    Flat bottomed milling tool, used to tidy up the broken end of pipe stuck in the hole prior to fishing.
  - MILL_HOLLOW
```
public static final TubularComponent MILL_HOLLOW
```
    Hollow milling tool
  - MILL_POLISH
```
public static final TubularComponent MILL_POLISH
```
  - MILL_SECTION
```
public static final TubularComponent MILL_SECTION
```
  - MILL_TAPER
```
public static final TubularComponent MILL_TAPER
```
    Tapered milling tool.
  - MILL_WASHOVER
```
public static final TubularComponent MILL_WASHOVER
```
    Large diameter milling tool that goes over the end of stuck pipe.
  - MILL_PACKER_PICKER_ASSEMBLY
```
public static final TubularComponent MILL_PACKER_PICKER_ASSEMBLY
```
  - MILLOUT_EXTENSION
```
public static final TubularComponent MILLOUT_EXTENSION
```
  - MULTILATERAL_HANGER_RUNNING_TOOL
```
public static final TubularComponent MULTILATERAL_HANGER_RUNNING_TOOL
```
    Tool used to hang casing in multi-lateral wellbores.
  - HANGER_MUD_LINE
```
public static final TubularComponent HANGER_MUD_LINE
```
  - MOTOR
```
public static final TubularComponent MOTOR
```
    Downhole tool, usually powered by fluid flow, that rotates the drill bit.
  - MULE_SHOE
```
public static final TubularComponent MULE_SHOE
```
  - LOGGING_WHILE_DRILLING_TOOL
```
public static final TubularComponent LOGGING_WHILE_DRILLING_TOOL
```
    Tool that can take downhole measurements of formation properties and wellbore direction while drilling.
  - STABILIZER_NEAR_BIT_ROLLER_REAMER
```
public static final TubularComponent STABILIZER_NEAR_BIT_ROLLER_REAMER
```
    Stabilizer that is placed close to the bit
  - STABILIZER_NEAR_BIT
```
public static final TubularComponent STABILIZER_NEAR_BIT
```
    Stabilizer placed near the bit to provide directional control.
  - STABILIZER_NON_ROTATING
```
public static final TubularComponent STABILIZER_NON_ROTATING
```
    Stabilizer that does not rotate with the drill string.
  - SUB_ORIENTING
```
public static final TubularComponent SUB_ORIENTING
```
    Sub used to orient the drill string for directionla drilling.
  - OTHER
```
public static final TubularComponent OTHER
```
  - OVERSHOT
```
public static final TubularComponent OVERSHOT
```
    Tool used for retrieving pipe that has been lost in the hole.
  - OVERSHOT_LH
```
public static final TubularComponent OVERSHOT_LH
```
    Left-handed overshot tool.
  - OVERSIZE_LIP_GUIDE_OVERSHOT
```
public static final TubularComponent OVERSIZE_LIP_GUIDE_OVERSHOT
```
    Specific type of overshot tool used for fishing.
  - PACKER
```
public static final TubularComponent PACKER
```
    Component that can be inflated so that it seals off a section of the wellbore, typically for formation testing.
  - POLISHED_BORE_RECEPTACLE
```
public static final TubularComponent POLISHED_BORE_RECEPTACLE
```
  - MILL_PILOT
```
public static final TubularComponent MILL_PILOT
```
    Milling tool used in fishing stuck pipe.
  - PIPE_CUTTER
```
public static final TubularComponent PIPE_CUTTER
```
    Tool for cutting through pipe that has become stuck in the hole.
  - PORTED_STINGER
```
public static final TubularComponent PORTED_STINGER
```
  - SUB_PORTED
```
public static final TubularComponent SUB_PORTED
```
    Component with a port or vent tha allows mud to be circulated into the annulus.
  - PREPACKED_SCREENS
```
public static final TubularComponent PREPACKED_SCREENS
```
    A type of screen used in sand control applications to support the gravel pack.
  - SUB_PRESSURE_RELIEF
```
public static final TubularComponent SUB_PRESSURE_RELIEF
```
    Component used to relieve wellbore pressures.
  - RISER_PRODUCTION
```
public static final TubularComponent RISER_PRODUCTION
```
    Riser pipe used to carry produced fluids.
  - MWD_PULSER
```
public static final TubularComponent MWD_PULSER
```
    Measurement While Drilling component that send encodes downhole data into hydraulic pulses that can be detected and decoded at the surface.
  - SUB_PUMP_OUT
```
public static final TubularComponent SUB_PUMP_OUT
```
  - SUB_RESTRICTOR
```
public static final TubularComponent SUB_RESTRICTOR
```
    Component that provides a restriction to mud flow to control hydraulics.
  - PACKER_RETRIEVE_TT_SQUEEZE
```
public static final TubularComponent PACKER_RETRIEVE_TT_SQUEEZE
```
    Torque Transmission
  - REVERSING_TOOL
```
public static final TubularComponent REVERSING_TOOL
```
    A downhole tool that is designed to enable communication between the tubing internal diameter and the annulus, typically for reverse-circulation purposes
  - STABILIZER_STRING_ROLLER_REAMER
```
public static final TubularComponent STABILIZER_STRING_ROLLER_REAMER
```
    A stabilizer that has rotating rollers rather than fixed blades to reduce friction with the sides of the hole.
  - PACKER_RTTS
```
public static final TubularComponent PACKER_RTTS
```
    Retrievable packer, designed for testing, treating, and squeezing.
  - RUNNING_TOOL
```
public static final TubularComponent RUNNING_TOOL
```
  - SAFETY_JOINT
```
public static final TubularComponent SAFETY_JOINT
```
    A weak spot in the drillstring so that if tension in the drillstring exceeds a predetermined amount, the safety joint will part and the rest of the drillstring will be salvageable.
  - SAFETY_JOINT_LH
```
public static final TubularComponent SAFETY_JOINT_LH
```
    Left-handed threaded safety joint providing a weak spot in the drillstring so that if tension in the drillstring exceeds a predetermined amount, the safety joint will part and the rest of the drillstring will be salvageable.
  - SUB_SAVER
```
public static final TubularComponent SUB_SAVER
```
    Component used to reduce wear on the threads of components such as drill bits that are often re-used.
  - SCAB_LINER_BIT_GUIDE
```
public static final TubularComponent SCAB_LINER_BIT_GUIDE
```
  - SCRAPER
```
public static final TubularComponent SCRAPER
```
  - SCRATCHERS
```
public static final TubularComponent SCRATCHERS
```
    A device for cleaning mud and mud filter cake off of the wellbore wall when cementing casing in the hole to ensure good contact and bonding between the cement and the wellbore wall.
  - CASING_SHOE_SCREW_IN
```
public static final TubularComponent CASING_SHOE_SCREW_IN
```
    Screw-in casing shoe.
  - SUB_SHOCK
```
public static final TubularComponent SUB_SHOCK
```
  - DRILL_COLLAR_SHORT
```
public static final TubularComponent DRILL_COLLAR_SHORT
```
    Short drill collar used to adjust the length and spacing of BHA components.
  - SUB_SIDE_ENTRY
```
public static final TubularComponent SUB_SIDE_ENTRY
```
  - SLOTTED_LINER
```
public static final TubularComponent SLOTTED_LINER
```
    Liner casing that has slots to allow passage of produced fluids.
  - SPEAR
```
public static final TubularComponent SPEAR
```
    Fishing tool that attaches to the inside of the stuck pipe by threads or grapples.
  - STAGE_CEMENT_COLLAR
```
public static final TubularComponent STAGE_CEMENT_COLLAR
```
  - MOTOR_STEERABLE
```
public static final TubularComponent MOTOR_STEERABLE
```
    Downhole motor, usually powered by mud flow, that can be steered.
  - PACKER_STORM_VALVE_RTTS
```
public static final TubularComponent PACKER_STORM_VALVE_RTTS
```
    Retrievable packer, designed for testing, treating, and squeezing.
  - STABILIZER_STRING
```
public static final TubularComponent STABILIZER_STRING
```
  - SURFACE_PIPE
```
public static final TubularComponent SURFACE_PIPE
```
    Pipework that connects the top of the drillstring to the mud pumps.
  - TAPER_TAP
```
public static final TubularComponent TAPER_TAP
```
    Tool used to tap a thread into components that are stuck in the hole.
  - TAPER_TAP_LH
```
public static final TubularComponent TAPER_TAP_LH
```
    Left-handed thread tapping tool.
  - TUBING_CONVEYED_PERFORATING_GUN
```
public static final TubularComponent TUBING_CONVEYED_PERFORATING_GUN
```
    Perforating gun that is deployed on the end of a tubular string rather than a wireline
  - THRUSTER
```
public static final TubularComponent THRUSTER
```
    Drilling tool used to maintain weight on bit.
  - TIEBACK_POLISHED_BORE_RECEPTACLE
```
public static final TubularComponent TIEBACK_POLISHED_BORE_RECEPTACLE
```
  - TIEBACK_STINGER
```
public static final TubularComponent TIEBACK_STINGER
```
    Tool used to position a tie-back string of tubing connecting a liner to the surface.
  - TUBING
```
public static final TubularComponent TUBING
```
    Small diameter pipe that is run inside casing or tubing as part of the well completion.
  - HANGER_TUBING
```
public static final TubularComponent HANGER_TUBING
```
    Component used to hang tubing inside casing or liner.
  - TURBINE
```
public static final TubularComponent TURBINE
```
    Downhole device used for directional drilling, powered by mud circulation that rotates the drill bit while the drill string remains non-rotating
  - BIT_UNDER_REAMER
```
public static final TubularComponent BIT_UNDER_REAMER
```
    Component that is run behind the bit and opens out the hole to a larger diameter.
  - STABILIZER_VARIABLE_BLADE
```
public static final TubularComponent STABILIZER_VARIABLE_BLADE
```
    Stabilizer with blades that can be adjusted to varying diameters.
  - WASHOVER_PIPE
```
public static final TubularComponent WASHOVER_PIPE
```
    Large diameter pipe with an internal grapple used for retrieving stuch pipe.
  - MILL_WATERMELON
```
public static final TubularComponent MILL_WATERMELON
```
    Milling tool shaped like a watermelon.
  - WHIPSTOCK
```
public static final TubularComponent WHIPSTOCK
```
    Wedge shaped tool used to drill off in a different direction.
  - WHIPSTOCK_ANCHOR
```
public static final TubularComponent WHIPSTOCK_ANCHOR
```
    Anchor device used to position whipstock.
  - STABILIZER_TURBO_BACK
```
public static final TubularComponent STABILIZER_TURBO_BACK
```
  - STABILIZER_INLINE
```
public static final TubularComponent STABILIZER_INLINE
```
  - STABILIZER_STEERABLE
```
public static final TubularComponent STABILIZER_STEERABLE
```
    Stabilizer with adjustable blades to allow steering the drilling direction.
  - SUB_STOP
```
public static final TubularComponent SUB_STOP
```
  - SUB_FILTER
```
public static final TubularComponent SUB_FILTER
```
  - MILL_CASING_CUTTING
```
public static final TubularComponent MILL_CASING_CUTTING
```
    Milling tool used for cutting through casing.
  - REAMER
```
public static final TubularComponent REAMER
```
    Tool used to enlarge the hole.
  - UNKNOWN
```
public static final TubularComponent UNKNOWN
```
    The value is not known. This value should not be used in normal situations. All reasonable attempts should be made to determine the appropriate value. Use of this value may result in rejection in some situations.
- Method Detail
  - values
```
public static TubularComponent[] values()
```
    Returns an array containing the constants of this enum type, in the order they are declared. This method may be used to iterate over the constants as follows:
```
for (TubularComponent c : TubularComponent.values())
    System.out.println(c);
```
    Returns:
    
    an array containing the constants of this enum type, in the order they are declared
  - valueOf
```
public static TubularComponent valueOf(String name)
```
    Returns the enum constant of this type with the specified name. The string must match exactly an identifier used to declare an enum constant in this type. (Extraneous whitespace characters are not permitted.)
    
    Parameters:
    
    name - the name of the enum constant to be returned.
    
    Returns:
    
    the enum constant with the specified name
    
    Throws:
    
    IllegalArgumentException - if this enum type has no constant with the specified name
    
    NullPointerException - if the argument is null
  - value
```
public String value()
```
  - fromValue
```
public static TubularComponent fromValue(String v)
```

Enum TubularComponent

Enum Constant Summary

Method Summary

Methods inherited from class java.lang.Enum

Methods inherited from class java.lang.Object

Enum Constant Detail

NON_MAGNETIC_STABILIZER

NON_MAGNETIC_COLLAR

STABILIZER

ADJUSTABLE_KICKOFF

ACCELERATOR

ROTARY_STEERING_TOOL

SUB_BAR_CATCHER

SUB_BENT

BIT_CORE_DIAMOND

BIT_CORE_PDC

BIT_DIAMOND_FIXED_CUT

BIT_INSERT_ROLLER_CONE

BIT_MILL_TOOTH_ROLLER_CONE

BIT_PDC_FIXED_CUTTER

SUB_BIT

BRIDGE_PLUG

BULLNOSE

BULL_PLUG

SUB_BUMPER

CASING

CASING_CUTTER

HANGER_CASING_SUBSEA

HANGER_CASING_SURFACE

CASING_HEAD

CATCH_ASSEMBLY

SUB_CATCHER

SUB_CIRCULATION

COILED_TUBING_IN_HOLE

COILED_TUBING_ON_COIL

DRILL_PIPE_COMPRESSIVE

SUB_CONE

CORE_BARREL

CORE_ORIENTATION_BARREL

SUB_CROSSOVER

CASING_CROSSOVER

SUB_DART

DIE_COLLAR

DIE_COLLAR_LH

DIRECTIONAL_GUIDANCE_SYSTEM

DRILL_COLLAR

DRILL_PIPE

DRILL_PIPE_LH

DRILL_STEM_TEST_BHA

DRIVE_PIPE

DUAL_CATCH_ASSEMBLY

EXTENSION_BOWL_OVERSHOT

EXTENSION_SUB_OVERSHOT

FLOAT_COLLAR

FLOAT_SHOE

SUB_FLOAT

FLOW_HEAD

GUIDE_SHOE

MWD_HANG_OFF_SUB

HEAVY_WEIGHT_DRILL_PIPE

HEAVY_WEIGHT_DRILL_PIPE_LH

RISER_HIGH_PRESSURE

BIT_HOLE_OPENER

CASING_INFLATABLE_PACKER

MOTOR_INSTRUMENTED

JAR

SUB_JETTING

JUNK_BASKET

JUNK_BASKET_REVERSE_CIRCULATION

SUB_JUNK

KELLY

KEYSEAT_WIPER_TOOL

LANDING_FLOAT_COLLAR

LEAD_IMPRESSION_BLOCK

LINER

HANGER_LINER

MAGNET

RISER_MARINE

MILL_DRESS

MILL_FLAT_BOTTOM